Guide - Sending Ripple (XRP) from Gatehub to Rippex

Knowledgebase Forum - May 16th 2017

  1. evo

    evo Admin

    Joined:
    Apr 2017
    From:
    Seattle
    Crypto:
    BTC/ETH/XRP
    This is a how to guide for sending Ripple (XRP) from Poloniex to Rippex. I'm writing this guide for those who are very new to cryptocurrency, and I will take the time to expand on each step that is happening throughout the process.

    Rippex is a desktop wallet solution allowing you to maintain your own Ripple wallet. You can install Rippex on Windows, Mac, and Linux. Download here, and install.
    • Make sure you're in a safe place, where somebody cannot see your display.
    • Make sure you're in an environment where somebody is not using a camera to view your display.
    • Rippex is only as secure as your computer is. Make sure your anti-virus and anti-malware software are updated.
    Step 1 - Create New Rippex Account

    After you've installed Rippex, open the Ripple Wallet application, and choose 'Create New Account'.

    [​IMG]
    From here, choose 'Create an empty account' and the application will ask you where to store/save your "wallet" file. You can accept the default location or choose where you want to save this account file.

    [​IMG]
    Rippex will now ask you to encrypt your wallet account file with a password. Use a mix of letters, numbers, and symbols. Protect and safeguard this password in a safe place. After you've verified your password, choose 'Encrypt account'.

    [​IMG]
    Of all these steps, this is the most important. Rippex will display your password, Ripple wallet address, and your Secret Key. This Secret Key needs to be stored somewhere private and safe, because access to this key provides full access to your Ripple wallet.

    If you lose access to your computer, you can still access your Ripple wallet as long as you still have access to your Secret Key. Again, it's very important that you save this information, and make sure it's protected and safeguarded.

    [​IMG]
    After you've saved your Secret Key, confirm by choosing the 'Yes, I saved my secret key' button and your Ripple desktop wallet is setup and ready to go.

    Step 2 - Deposit XRP to your Rippex Account

    2.1 - Activate your Ripple Wallet

    Your newly created Ripple wallet doesn't become active until you've sent a minimum of 20 XRP to your wallet address. Ripple requires this 20 XRP to reserve your wallet address, and this is a one time requirement.

    2.2 - Deposit XRP to your Ripple Wallet

    Sending XRP from one Ripple wallet to another Ripple wallet is super easy, however there is absolutely zero room for error. I cannot stress this enough.

    Of equal importance, make sure the wallets you're sending/receiving XRP are both associated with Ripple (XRP). You can only send XRP to a Ripple wallet. Again, there is no room for error here.

    From one Ripple account, you're sending XRP or making a withdrawal. From the other Ripple account, you're receiving XRP or making a deposit. Those Ripple accounts are identified by unique wallet addresses, which is a long series of alpha-numeric characters. Your Ripple wallet address must be 100% correct, otherwise you've lost the XRP you're trying to send.

    If you prefer, feel free to send a small amount at first to see the transaction go through successfully, and follow it with a larger amount once you feel comfortable. There's a very small fee charged every time you send XRP, but it's incredibly small.

    To receive Ripple to your Rippex wallet, you're going to need the wallet address to send it to. You'll see your wallet address displayed in the upper right, and clicking on it will automatically copy it, so it's ready to paste.

    2.3 - Sending XRP from Gatehub to Rippex

    Login to your Gatehub account, go to your Wallet page, and in the upper left will be a link to Send Payment, which will bring up a module allowing you to send funds. Choose the 'Instant' option on the far left, and here you can paste in your Rippex wallet address and the amount of XRP you want to send.

    [​IMG]

    Verify your Rippex address is 100% correct and click Confirm. Gatehub will charge a very small fee to send the Ripple.

    [​IMG]

    You can see the status of your withdrawal by clicking the Recent Activity column in the far right. The transfer from Gatehub to Rippex should be a quick process.

    Step 3 - Viewing your Rippex Account

    Rippex does not need an Internet connection to be installed. It does require an Internet connection to access Ripple's servers to view your Ripple wallet on the Overview page.

    When you first install Rippex, the settings are automatically defaulted to offline mode. To bring Rippex online, click the gear icon in the upper right and go to the Settings page. Choose the 'Network Settings' in the left column and check the box for Online mode.

    [​IMG]
    Notice the Server settings on this same page, where it shows the Ripple's server addresses. The application will be required to access these servers to interact with Ripple's network. If you have a firewall or anti-virus software blocking network access, I would recommend whitelisting *.ripple.com to allow access to Ripple's servers.

    Once your XRP has been sent to your wallet address, it's automatically been added to your wallet. Rippex won't know this unless it's in Online mode. Assuming its online, Rippex will automatically alert you with a red notification in the upper right and your Balance page will automatically represent your newly deposited XRP.

    [​IMG]
    To see your complete transaction history, go to the History tab. Here, you can see all XRP you've sent and received over any time period.

    [​IMG]
    3.1 - Simple method for viewing your Ripple wallet

    Here's a very simple way to view your XRP balance, without logging into your Rippex account. When you first load Rippex, choose the 'Cold Wallet' option and copy your Ripple wallet address and choose 'Open Account'. This will access the Ripple network and simply show you how much XRP is stored on your Ripple wallet address.

    [​IMG]
    Alternatively, you can also copy/paste any Ripple address you have into this option, and Rippex will access the Ripple network to show you how much Ripple is being stored at this address. If you use your Gatehub wallet address, it should show you the same total amount of XRP that Gatehub shows. Warning about your Poloniex wallet address though, because exchange wallets only report the minimum 20 XRP requirement, because they are not part of the Ripple network and store XRP differently.

    3.2 - Sending XRP from Rippex to another Ripple wallet

    To send XRP from Rippex to Poloniex, Gatehub, or any Ripple wallet, open Rippex and go to the Send section.

    For the 'Receipient' field, enter the Ripple wallet address that you want to send XRP to. Disregard the Destination Tag and Invoice ID. For the amount, input how much Ripple you want to withdraw/send from your Rippex wallet. Verify the wallet address is 100% correct, and click 'Send XRP'.

    [​IMG]
    The Rippex application will charge a very small fee to send the Ripple. Within the application settings, under the Network Settings section, you can choose a Maximum network fee. The default is set to .20 XRP, and I changed this to .15 XRP, which is consistent with what Poloniex and Gatehub charge.

    Questions

    For questions, comments, feedback, or general thoughts, post up a reply within this thread, and I'll respond as I read them.
     
    Last edited: May 18th 2017

Share This Page